These Combination Lavatory/Toilet Fixtures are designed for
high security areas with an accessible pipe chase. Fixtures
are fabricated using 14-gauge type 304 stainless steel,
seamlessly welded to form a one piece, vandal resistant
unit. Internal piping is stainless steel. Exposed surfaces are
polished to a satin finish, except for integral seat which is
polished to a bright mirror finish.
STANDARD FEATURES
• Floor mounted cabinet, wall outlet waste.
• Rectangular lavatory basin with fast drain, air circulating self draining soap dish, and 4" (102mm) high backsplash.
• Elbow sink waste with air vent and 11/4" (32mm) OD plain end extended 4" (102mm) past back of fixture for slip type connection.
• Plated steel concealed anchor rods and fasteners.
• Back supply connection 11/2" (38mm) FIPT.
• Integral elongated seat.
• Self draining flushing rim.
• Blowout flushing action.
• 3" (76mm) OD toilet waste tube with plain end extended 4" (102mm) past back of fixture for NH type connection.
• Fully enclosed trap.
To receive a quote for this product, please complete the submittal linked below and either e-mail it to [email protected] or fax it to (800) 204-5630.
3126-90R&L
